Laumans logo

Laumans Techniek B.V.
Fahrenheitstraat 12
NL 6003 DC Weert
+31 (0)495-52 10 67

Laumans BVBA
Weertersteenweg 138/2
B-3640 - Kinrooi
+32 (0)89-70 20 96

Laumans Techniek Laumans Techniek Laumans Techniek Laumans Techniek Laumans Techniek Laumans Techniek Laumans Techniek Laumans Techniek Laumans Techniek

Setup/installation magnetic angle sensors

 

Permanent magnet
 

When attaching the magnet make sure that its magnetization direction (north / south pole) is aligned in a parallel manner to the sensor’s sensing face. The carrier material to hold the magnet should be non-ferromagnetic (e.g. no steel), otherwise it will hamper the sensing distance.

Working distance
The magnet rotor or the permanent magnet must be attached within the specified working distance to the sensor. Observe the specifications in the data sheet for axial displacement.

 

Zero signal

 

For coarse zero signal tuning, align the keyways provided at sensor and magnet rotor (accessory) with each other. Finetuning will be performed electronically by the downstream control. Clockwise rotation of the permanent magnet will generate a rise in the output signal.